ISO 7317 CDB angular contact ball bearings

Basic Static Radial Load Rating Co:41500 N; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:3200 rpm; Oil Speed Rating Open/Shielded n2:6300 rpm; Grease Speed Rating Open/Shielded n1:5300 rpm; B:22.00 mm; D:125.0000 mm; d:80.000 mm; Accessories:One Seal; Basic Dynamic Radial Load Rating C:50700 N;

h:38 mm; Mass lock nut:316 kg; b:70 mm; d3:1120 mm; Lock washer / Locking clip:MS 31/900; B5:154 mm; d1:1030 mm; Associated eyebolt for handling:M 20; d2:969 mm; B:125 mm;

B:39.70 mm; Sealed Speed Rating n3:5000 rpm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:65500 N; d:40.000 mm; Accessories:One Shield & Snap-Ri; Oil Speed Rating n2:6700 rpm; Grease Speed Rating n1:5000 rpm; D:90.0000 mm; Basic Dynamic Radial Load Rating C:67100 N;

Grease Speed Rating Open/Shielded n1:30000 rpm; d:10.000 mm; Sealed Speed Rating n3:19000 rpm; B:8.00 mm; D:26.0000 mm; Oil Speed Rating Open/Shielded n2:36000 rpm; Accessories:Without Accessories; Basic Dynamic Radial Load Rating C:4620 N; Fillet Radius ra:0.30 mm; Basic Static Radial Load Rating C

d:20.000 mm; Fillet Radius ra:1.00 mm; D:52.0000 mm; Oil Speed Rating n2:12000 rpm; Accessories:One Shield & Snap-Ri; Sealed Speed Rating n3:8500 rpm; Basic Dynamic Radial Load Rating C:23800 N; Grease Speed Rating n1:8500 rpm; B:22.20 mm; Basic Static Radial Load Rating Co:20000 N;

h:54.769 mm; N1:28.575 mm; da:150.813 mm; R2:37.306 mm; P120°:85.9 kN; J max.:549.275 mm; Bearing:23234 CCK/W33; S:4.763 mm; H2:69.85 mm; J min.:492.125 mm;

D:440 mm; rs (min):4 mm; with cylindrical bore:750 min-1; Grease:2560 kN; Static (Cor):22.3 mm; with tapered bore:890 min-1; Oil:216.260 kN; Pu:1660 kN; B:120 mm; Dynamic (Cr):12 mm;

Oil Speed Rating n2:10000 rpm; Grease Speed Rating n1:8000 rpm; d:30.000 mm; Fillet Radius rb:0.60 mm; Basic Static Radial Load Rating Co:26000 N; Basic Dynamic Radial Load Rating C:30700 N; B:32.00 mm; Fillet Radius ra:1.00 mm; D:62.0000 mm;

r1,2 min.:0.3 mm; Basic static load rating C0:30 kN; E:24 mm; D:30 mm; Reference speed:20000 r/min; ra max.:0.3 mm; Mass bearing:0.069 kg; Fw:18 mm; C:24 mm; Db:18.4 mm;

d:60.000 mm; B:18.00 mm; Basic Dynamic Radial Load Rating C:35100 N; Grease Speed Rating n1:15000 rpm; Fillet Radius ra:1.00 mm; D:95.0000 mm; Oil Speed Rating n2:22000 rpm; Basic Static Radial Load Rating Co:30000 N; Fillet Radius rb:0.60 mm;

Da min.:111 mm; ra max.:1.5 mm; Calculation factor Y0:1.6; 2B:82 mm; Reference speed:3200 r/min; Limiting speed:4800 r/min; d:75 mm; Da max.:121.5 mm; Calculation factor e:0.43; r5 min.:0.6 mm;

d:630 mm; Mass withdrawal sleeve:188 kg; G1:63 mm; G2:G 1/4; Hydraulic nut:HMV 134 E; Nut for removal:HM 31/670; B1:475 mm; B2:489 mm; G:Tr 670x6; A:11 mm;

P60°:669 kN; Lock washer:W 40; h:87.313 mm; S:4.763 mm; RG:1 NPT; Pa:173 kN; Lock nut:AN 40; H1:250.825 mm; ba:103.188 mm; L:869.95 mm;

B:7 mm; B4:8 mm; Lock nut:KM 6; d3:45 mm; G:M 30x1.5; d1:23.813 mm; Locking device:MB 6; Mass adapter sleeve assembly:0.12 kg; d:30 mm; B1:31 mm;

Axial load factor Y:0.4; da min.:338 mm; Da max.:562 mm; ra max.:4 mm; Limiting value e:0.3; da max.:376 mm; Calculation factor kr:0.1; db min.:394 mm; Reference speed:1000 r/min; ra max.:4 mm;